La Crosse Technology WS-8015U instruction manual E.Remote Temperature Alarm 1.Activating the alarm

f.Follow the Detailed Set-Up Guide for programming and operating instructions.

2.Viewing and Operating with Multiple Remote Sensors

a.To view the temperature of a different remote sensor press and release the “CHANNEL” button. A shift from one “boxed” number to the next should be observed in the OUTDOOR LCD.

b.The minimum and maximum temperature of the additional remote sensor will be displayed below the current temperature of the remote sensor in the OUTDOOR LCD.

c.To reset the minimum and maximum temperature readings press and hold the “RESET” button for 5 seconds and the records for all the remote sensor will be reset.

Each remote sensor will have its own minimum and maximum values stored, as well as its own alarm settings for temperature. Resetting the outdoor minimum and maximum values will reset all remote sensors’ recordings.

E.Remote Temperature Alarm

1.Activating the alarm

From the normal mode, press and release the “OUT” key to toggle between the temperature alarm and minimum/maximum values. “ALARM” will be displayed above the remote temperature display; this will also activate the temperature alarm.

2.Setting the temperature alarm

a.Press and hold the “OUT” key for two seconds.

b.The low temperature will be flashing (32°F default/factory setting).

c.Press and release the “+” or “–“key to adjust the temperature from -22°F to +157°F (“- -” if outside this range). Any value attained below this will sound the alarm.

d.Press and release the “SET” key to advance to the high temperature alarm.

e.The high temperature setting is now flashing (86°F default/factory setting).

f.Press and release the “+” or “–“key to adjust the temperature from -22°F to +157°F (“- -” if outside this range). Any value attained above this value will sound the alarm.

21