MIC400 Series Camera Installation and Operation Manual
CHAPTER 5 Technical Specifications
MIC400AL
CAMERA MODULE |
|
Image sensor | 1/4" EXview CCD |
Picture elements | 380K NTSC / 440K PAL (WIDE) |
Horizontal resolution | 470TVL NTSC / 460TVL PAL (WIDE) |
Filter | Automatic mechanical IR cut filter |
Focus system | Auto or manual Iris |
Synchronisation | Internal / External |
Recommended illumination | 100 to 100,000 lx |
Signal/Noise ratio | 50dB or more |
Back Light Compensation (BLC) On/Off | |
White balance | Automatic |
Automatic Gain Control (AGC) | |
Aperture control | 16 Steps |
18x optical zoom module |
|
Lens | F=4.1mm (WIDE) to 73.8mm (TELE), F1.4 to |
| F3.0 |
Zoom | 18x optical (12x digital) |
Angle of view | 48º (WIDE end) to 2.8º (TELE end) |
Minimum illumination | 0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL), 0.11 lux |
| (F1.4, 1/4s NTSC, 1/3s PAL), 0.01 lux or less |
| (F1.4, 1/4s NTSC, 1/3s PAL, ICR ON) |
Shutter speed | 1/1 to 1/10,000s (22 steps) NTSC, PAL |
36x optical zoom module |
|
Lens | F=3.4mm (WIDE) to 122.4mm (TELE), F1.6 to |
| F4.5 |
Zoom | 36x optical (12x digital) |
Angle of view | 57.8º (WIDE end) to 1.7º (TELE end) |
Minimum illumination | 1.4 lux (1/60s NTSC, 1/50s PAL), 0.1 lux (1/4s |
| NTSC, 1/3s PAL), 0.01 lux or less (1/4s NTSC, |
| 1/3s PAL, ICR ON) |
Shutter speed | 1/4 to 1/10,000s (20 steps) NTSC, 1/3 to |
| 1/10,000s (20 steps) PAL |
| EN 55 |
OPERATIONAL* |
|
Auto flip | Yes |
Manual flip | Yes |
Dynamic privacy zones | 3D privacy masking with infinite zones (using |
| optional |
| privacy card) |
Presets | 64 telemetry presets utilising resolver technology |
| (using FV protocol, 10 camera |
| allow ANPR, colour correction etc.) |
Preset tours | Auto or manual with slow shutter integr |
6 tours each with up to 32 presets | |
Sector titles | Yes (64 sectors) 20 characters per title |
Preset titles | 20 character caption for each of the 64 presets |
Home position | Yes (preset 1 or tour) |
COMMUNICATION & PROTOCOLS | |
Communication | RS485 / RS422 |
Control protocol | Refer to current supported protocol list |
CONNECTIVITY |
|
Video | |
Telemetry | Twisted pair. Simplex, half and full duplex |
| operation via composite cable |
Power | Via composite cable |
ALARMS |
|
Alarm inputs | 1 tamper input (additional inputs possible with |
| optional alarm card in PSU) |
Alarm communication | Tamper switch (ground connection) |
MECHANICAL
Bosch Security Systems | Issue 1 |
