MIC400 Series Camera Installation and Operation Manual

EN 20

3.Break the two solder links and trim away excess solder.

4.Solder the links from the left hand pads to the middle pads as shown next.

5.The power supply will now deliver +15vac to HD6.

6.Connect the heater wires Brown and Grey to the HD6 termination header as labelled on the PCB and in.

7.The heaters are thermostatically controlled and will automatically turn on at +5°C and turn off at +15°C.

8.Check all connections, reseal the PSU enclosure and reapply power.

Bosch Security Systems

Issue 1

Page 20
Image 20
Bosch Appliances MIC400AL operation manual Bosch Security Systems Issue