MIC400 Series Camera | Installation and Operation Manual AAAEN | 4
Bosch Security Systems Issue 1
POT Test Controls…………………………………………………………. 4-47
POT Test Results…………………………………………………………. 4-47
Comms…………………………………………………………………….. 4-48
Send Direct Command…………………………………………………… 4-48
Communications Testing…………………………………………………. 4-49
SonySet…………………………………………………………………….. 4-50
SonySet Controls………………………………………………………….. 4-50
The SonySet Table………………………………………………………... 4-51
MIC Programmer…………………………………………………………... 4-53

Technical Specifications.......................................... 5-55

Technical Specifications…………………………………………………. 5-55
MIC400AL……..………………………………………………………….. 5-55
MIC400PA……..………………………….……………………………….. 5-57
MIC400UL and UT…..……………………………………………………. 5-58
MIC400S………..………………………………………………………….. 5-59
MIC400IR…………..………………………………………………………. 5-60
Dimension Drawings…………………………………………………….... 5-61

Safety Precautions
The following symbols are used throughout this manual please pay careful
attention to their meaning.
Important Safety Instructions
CAUTION
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DISCONNECT POWER SUPPLY BEFORE OPENING THE
POWER SUPPLY UNIT.
POWER DISCONNECT: POWER SUPPLY UNITS HAVE
POWER SUPPLIED WHENEVER THE POWER CORD IS
INSERTED INTO THE POWER SOURCE
WARNING
INSTALLATION SHOULD BE CARRIED OUT BY QUALIFIED
PERSONNEL ONLY IN ACCORDANCE WITH THE
APPLICABLE LOCAL CODES.
BOSCH SECURITY SYSTEMS ACCEPT NO LIABILITY FOR
ANY DAMAGES OR LOSSES CAUSED DUE TO
INCORRECT OR IMPROPER INSTALLATION
The exclamation point within a triangle is intended to alert the
user to the presence of important safety, operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
The lightning flash with an arrowhead symbol within a triangle
is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock
to
pe
r
so
n
s.