6
V) TIME SETTING
Note: When the WWVB signal is found, that time will over-ride the manually set time.
1) Hold down the “SET” button for 2 seconds (the selected time zone will flash).
2) Press the “SET” button 3 more times, until the hour “12” flashes in the time LCD.
3) Press the “+” button to select the hour.
Note: when setting the hour, “PM” will appear to the left of the hour display, if it is AM nothing will be
displayed.
4) Press the “SET” button to confirm the hour setting, and to shift to select the minutes.
5) Press the “+” button to select the minutes.
6) Press the “SET” button to confirm the time setting, and to advance to manually set the calendar.
VI) CALENDAR SETTING
Note: When the WWVB signal is found, that date will over-ride the manually set date.
1) Hold down the “SET” button for 2 seconds (the selected time zone will flash).
2) Press the “SET” button 5 more times, until the default year “00” flashes in the date LCD.
3) Press the “+” button to select the year.
4) Press the “SET” button to confirm the year, and to set the month.
5) The default month “1” will flash.
6) Press the “+” button to select the appropriate month.
7) Press the “SET” button to confirm the month, and to set the date.
8) The default date “1” will flash.
9) Press the “+” button to select the appropriate date.
10) Press the “SET” button to confirm the date, and to set the weekday.
11) The default weekday “MON” (depends on selected language) will flash.
12) Press the “+” button to select the appropriate weekday.
13) Press the “SET” button to confirm the calendar settings, and to advance to select either 12 or 24-hour
time display.
VII) 12/24-HOUR SETTING
1) Hold down the “SET” button for 2 seconds (the selected time zone will flash).
2) Press the “SET” button 9 more times, until the “12” hour time display flashes in the time LCD.
3) Press the “+” button to toggle between 12 and 24 hour time.
4) Press the “SET” button to confirm the 12/24-hour time display, and to advance to select either °F or
°C.
VIII) SELECTING °F OR °C
1) Hold down the “SET” button for 2 seconds (the selected time zone will flash).
2) Press the “SET” button 10 more times, until the default “°F” flashes in the time LCD.
3) Press the “+” button to toggle between °F and °C.
4) Press the “SET” button to confirm the °F or °C selection, and exit the Program Mode.