1.Fix a screw (not supplied) into the desired wall, leaving the head extended out the by about 0.2” (5mm).
2. Fold the stand of the intelligent weather station by pushing inward and hang it onto the screw. Remember to ensure that it locks into place before releasing.
POSITIONING THE REMOTE
TEMPERATURE / HUMIDITY SENSOR:
The remote temperature/humidity sensor can be placed onto any flat surface or wall mounted using the bracket which doubles as a stand or wall mount base.
Table stand/wall mount bracket
To wall mount:
1.Secure the bracket onto a desired wall using the screws and plastic anchors.
2.Clip the remote temperature/humidity sensor onto the bracket.
Note:
Before permanently fixing the remote temperature/humidity sensor wall base, place all units in the desired locations to check that the outdoor temperature and humidity readings are receivable. In event that the signal is not received, relocate the remote temperature/humidity sensor or move them slightly as this may help the signal reception.
31
