V.OUTDOOR CHANNEL RE-LEARN MODE
In case the temperature data in a particular outdoor channel often shows
To do this, after the individual temperature sensor is set:
1.Press and hold the CHANNEL key for 6 seconds until the channel identification number flashes.
2.Press and release the MIN/MAX/+ or the ALARM/- key to select the identification number for the “lost” channel
3.Press and release the CHANNEL key again to confirm the selected channel. The “lost” channel will resume within 2 minutes and all transmitters will work normally again.
V. MOON PHASE
There are 8 moon phases shown on the indoor weather station. Thus, when the moon icon is all white, it is a full moon.
Full Moon | New Moon |
Waning Gibbous | Waxing Crescent |
Last Quarter | First Quarter |
Waning Crescent | Waxing Gibbous |
The tide information is also indicated on the left side of the Moon Phase information automatically.
VI. | TIME ALARM |
To set the time alarm:
1.Press and hold the ALARM/- button for 3 seconds.
2.The alarm time will begin to flash in the DATE LCD.
3.Press and release the MIN/MAX/+ button to increase the hour .
Note: When in the
4.Press and release the ALARM/- button to select the minutes
5.Press and release the MIN/MAX/+ button to adjust the minutes.
6.Press and release the ALARM/- button to confirm the setting or wait for 15 seconds and the display will automatically return to the normal mode.
To activate the alarm:
1.Press and release the ALARM/+ button to activate the alarm.
2.When the alarm icon is showing in the DATE LCD the alarm is activated.
13