
V.RADIO-CONTROLLED TIME ON/OFF SETTING
1.“RCC” will appear in the DATE LCD and “ON” or “OFF” will flash in the TIME LCD.
2.Press and release the MIN/MAX/+ or the ALARM/- key to select
3.Press and release the SET button to confirm and advance to the
VI. 12 OR 24 HOUR TIME SETTING
1.“12h” or “24h” will flash in the TIME LCD.
2.Press and release the MIN/MAX/+ or the ALARM/- button to select 12 or
Note: When in the
3. Press and release the SET button to confirm and advance to the time setting.
VII. TIME SETTING
There are two methods by which the time and date can be set:
A)Automatically via WWVB reception, or
B)Manually.
A. WWVB (Remote Control Time)
This method requires you to do nothing, except wait for the signal to be received, and to select a time zone. Reception usually takes approximately 10 minutes during optimal conditions. The best conditions for reception is at night, between midnight and 6:00
B. MANUAL TIME SETTING
Note: When in the
Note: Reception of the WWVB signal will automatically set the time. The reception of the signal will override any programmed time.
1.The hours digits will flash in the TIME LCD.
2.Press and release the MIN/MAX/+ button to advance or the ALARM/- key to decrease the hours.
8