La Crosse Technology WS-9077TWC-IT Wwvb Remote Control Time, Manual Time Setting

Models: WS-9077TWC-IT

1 20
Download 20 pages 25.48 Kb
Page 9
Image 9

There are two methods by which the time and date can be set:

A)Automatically via WWVB reception, or

B)Manually.

A. WWVB (Remote Control Time)

This method requires you to do nothing, except wait for the signal to be received, and to select a time zone. Reception usually takes approximately 10 minutes during optimal conditions. The best condition for reception is at night, between midnight and 6:00 am—when there is less atmospheric interference. To keep your time as accurate as possible, the Wireless Weather Station conducts a WWVB search every night between these hours, and overrides any manually set time. The WWVB tower icon (appearing in the TIME LCD) will flash when a signal-search is in progress and a signal is being received, and will remain steady when the signal has been received. If the WWVB time has not been received after 10 minutes of battery installation, you may manually set the time or leave the time function alone (reception will occur regardless). After a successful reception, no more reception attempt would be made until the following day.

B. MANUAL TIME SETTING

Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD between the hours of noon and midnight.

1.Press and hold the SET button for 5 seconds.

2.“LCD” will show in the time LCD and the number setting will flash.

3.Press and release the SET button five times.

4.The time will flash in the time LCD.

5.Press and release the IN button to advance the hours.

6.Press and release the OUT button to advance the minutes.

7.Press and release the SET button to confirm and advance to the year setting.

IX. SETTING THE YEAR, DAY AND MONTH

Note: Reception of the WWVB signal will also set the date and day. The reception of the signal will override any programmed date and day.

1.Press and hold the SET button for 5 seconds.

2.“LCD” will show in the time LCD and the number setting will flash.

3.Press and release the SET button six times.

4.The year will flash in the date LCD.

9

Page 9
Image 9
La Crosse Technology WS-9077TWC-IT Wwvb Remote Control Time, Manual Time Setting, IX. Setting the YEAR, DAY and Month