La Crosse Technology WT-5350 Projection of Time, EL. Back Light, Time Alarm Setting the Alarm

7.For more detail visit http://www.boulder.nist.gov/timefreq.htm. To listen to the NIST time call (303) 499-7111. This number will connect you to an automated time, announced at the top of the minute in "Coordinated Universal Time", which is also known as Greenwich Mean Time (GMT). This time does not follow Daylight Saving Time changes. After the top of the minute a tone will sound for every second.

8.It is possible that your Projection Alarm may not be exactly on the second due to the variance in the quartz. However, the clock will adjust the quartz timing over the course of several days to be very accurate; under 0.10 seconds per day.

C.PROJECTION OF TIME

1.When plugged into an AC outlet, the projection alarm can continuously project the time.

2.When operating on batteries alone, the Projection Alarm will only project when a button is pressed.

GB P.18

D. EL. BACK LIGHT

1.The Projection Alarm has an EL. Back light designed for night viewing. This will light up for 2 seconds whenever a button is pressed.

2.The EL. Back light cannot be turned on constantly; this would drain the batteries and burn out the light.

E. TIME ALARM.

1.SETTING THE ALARM

a.Press and hold "AL" for two seconds until the alarm time is flashing.

b.Press the "MODE/+" button to select the hour.

Note: When setting the hour, "PM" will appear to the left of the alarm time display. If it is set for "AM" nothing will appear.

c.Press the "AL" button to advance to the minute setting.

d.Press the "MODE/+" button to select the minutes.

3.The projection will auto-focus for display from three to six feet away. A dark surrounding will be necessary to clearly see the projection.

4.The direction of the display can be rotated 3600 in 900 increments by pressing the directional button. There is no display on the LCD that signifies the direction.

5.The projector case can be rotated 1800 to further help orient the projected display.

6.The intensity of the projection can be adjusted to three different settings as well as turned "off" by pressing the Light Intensity button. When turned off, the projection will only come on when a button is pressed. The intensity cannot be set for the projected display when set to "off". When only

batteries are used, the intensity setting is set to "off" with no other options.

DATE
AL/SEL	MODE/ + PROJECTION
Light Intensity	Protection Direction

P.19 GB

e.Press the "AL" button to confirm the alarm setting and return to the display mode.

2.ACTIVATING/DEACTIVATING THE ALARM

a.After entering the alarm-setting mode, the alarm is activated.

b.To toggle between activating and deactivating the alarm, press the "AL" button briefly. "(((•)))" will be displayed to the left of the time display when the alarm is activated.

c.When the snooze bar is pressed, the display will show the time the alarm is set to below the time display.

Alarm is Active ALM

GB P.20 P.21 GB