![](/images/new-backgrounds/1254880/25488027x1.webp)
13
8.1 Countdown Timer Mode - Setting the Timer
hold
Increase
the number
start/stop button
increase the
number at
a higher speed
hold start/stop
To Set the Countdown Timer
-Press and hold the [mode] button for 2 seconds to change the display from Countdown Timer Mode to
Countdown Timer Setting Mode.
NOTE: The setting range of the timer: 0 to 99 hour, 59 minutes, 59 seconds.
- The second digits flash on the display because it is |
mode
mode
button
second | minute |
mode
button
mode
button
hour
Alarm Time Setting Sequence
being selected. |
The Setting Procedure
-Press [mode] button to change the selection following the Countdown Timer Setting Sequence.
- If the digits are flashing, press the [s ta rt /s to p] bu tt on to increase the number; hold the [start/stop] button to change the number at a higher speed. Press the [compass] button to decrease the n um be r; ho ld th e
[compass] button to change the number at a higher speed.
compass button
decrease the number
hold compass
decrease the
number at
a higher speed
-After you set the timer, press the [mode] button to exit the setting sequence.
-If no
14