La Crosse Technology XG-20 Timer Mode Using the Timer, To Use the Timer, To Reset the Timer

8.2 Timer Mode - Using the Timer

Countdown Timer Mode indicator

Pre-set	analog
countdown time	second

To Use the Timer

- W h e n t h e t i m e r i s s e t , p r e s s t h e [ s t a r t / s t o p ] button to start the timer. Press the [start/stop] button again to stop the timer.

-If the timer is started, the countdown time (hour, minute and second) will be shown on the display continuously.

Countdown Timer Mode

start/stop

the countdown time

Countdown Timer

'running' Mode

-The timer starts to beep every second when it is 5 seconds to the end of the countdown.

-When the countdown time reaches zero, a long beep lasting for 2 seconds will be heard.

-Press any button in this period to terminate the beep sound prematurely.

-When the countdown time reaches zero, press [compass] b u t t o n t o r e - l o a d t h e p r e s e t t i m e , o r p r e s s [start/stop] button to re- load the preset time and start the countdown simultaneously.

To Reset the Timer

-Press and hold the [compass] button for 2 seconds to reset the timer while the timer is stopped.

.

15