SET DRINKS
Entering the program through Enter, you will see the sequence of the existing drink codes.
The flashing cursor points out the drink code selected, to move it use the keys + to advance or - to withdraw; contemporarily to the movement of the cursor, in the underlying line, the name of the selection will be visualized related to the drink code.
01-02-03-04
Sel.1
To modify the parameters of the drink code press Enter.
A sequence of numbers will be visualized that correspond to the doses of the se- lection, the line price (P) and the menu of the name of the drink (MS).
03-P1-MS
ESPRESSO
As in precedence, the cursor points out the dosing code selected, therefore to move it use the keys “up” or
To modify its value, after having selected it, press E.
ESPRESSO WATER
45
Use
SAVE CHANGES ?
YESNO
Press"
RESET COUNTERS&AMOUNTS: Reset of all the counters above. Press “6” to confirm or “5” to cancel.
ENABLE TEMPERAT.ON DISPLAY: Visualization on display of the boiler temperature.
SERIAL NUMBER: set the serial number of the machine.
CAUTION ! OUTPUT TEST !: test of all the electrical output of the electronic board (see the chart at page 18).
TYPE OF MACHINE:
DISPLAY COUNTERS ENABLE: if enabled, at the
BOILER 1 WORKING: enable of the boiler 1.
Note 1: to avoid the blocks in the mixing group, the software controls the powder and water values in the way explained in the diagram.
Pag. 8 | Pag. 17 |