LaCie Little Disk manual Setup Steps

Setup Steps

1.Remove the cap and con- nect the FireWire 400 cable to your Little Disk and to your computer (A) OR pull out the USB 2.0 cable and connect it to your computer (B).

A B

USB extension cable included (optional)

2.The Little Disk will power on and mount on your desktop (Mac) or in My Computer (Windows) in a few seconds.

3.Install LaCie Shortcut Button software to enable the feature.

Optional: Some computers limit USB bus power. If your drive does not power on after connecting the USB cable, you may need to connect the USB power sharing cable to power your drive. Unplug the USB cable from the drive, con- nect the USB power sharing cable to your computer and to the drive and recon- nect the USB cable.

NOTE: User Manual and utilities are pre-loaded on the Little Disk.

The LaCie Little Disk is pre-formatted as a FAT 32 volume, ready for immediate cross platform use with Mac and Windows. Please refer to the User Manual pre-loaded on the drive for information about formatting your LaCie Little Disk.

For the latest documentation and software updates, please visit www.lacie.com and click on “Support and Downloads.”