Table of Contents
Important Safety Information
Land Pride
Safety Labels
Your mower comes equipped with all safety labels in place. They were designed to help you safely operate your implement. Read and follow their directions.
1.Keep all safety labels clean and legible.
2.Replace all damaged or missing labels. To order new labels go to your nearest Land Pride dealer.
3.Some new equipment installed during repair requires safety labels to be affixed to the replaced component as specified by Land Pride. When ordering new components make sure the correct safety labels are included in the request.
17962 |
4.Refer to this section for proper label placement. To install new labels:
a.Clean the area the label is to be placed.
b.Spray soapy water on the surface where the label is to be placed.
c.Peel backing from label. Press firmly onto the surface.
a.Squeeze out air bubbles with the edge of a credit card.
818-130C
Caution: To avoid injury
17964 |
13314 |
818-230C
Red Reflector (Both Sides)
818-540C
Danger: Guard Missing
4 | FM2060 & FM2072 Flail Mowers | 3/25/08 |
