Manuals / Land Pride / Lawn and Garden / Lawn Mower

Land Pride 309-100M Troubleshooting, Table of Contents, Problem, Belt slipping, Gearbox noisy

Models: 309-100M

1 24

Download 24 pages 47.95 Kb

Page 20

Section 7: Troubleshooting

Table of Contents

Section 7: Troubleshooting

Problem

Solution

Land Pride

!CAUTION

Do not try to clean rear discharge area when mower is running. Bodily harm may occur!

Belt slipping	Unplug and clean mower deck.

	Remove belt guard shields and clean sheaves.

	Replace belt


Patches of uncut grass	Mow at full throttle (540 PTO rpm), check PTO speed and tractor engine.

	Shift transmission to a lower gear.

	Tighten belts.

	Replace missing knives.

Excessive vibration	Replace knives

	Replace drive belt.

	Replace pulleys or align.

	Remove belt guard shields & clean debris from belt area & sheaves.


Gearbox noisy	Check lubricant level.

Knives scalping grass	Raise cutting height by adjusting roller.

	Change mowing pattern.

	Reduce speed turns.

Uneven cut	Shift to a lower gear.

	Level mower.

	Replace missing knives.

Tractor loaded down by mower	Mow at full throttle (540 PTO rpm).

	Shift to a lower gear.

	Clean mower.

18 FM2060 & FM2072 Flail Mowers 309-100M

3/25/08

Image 20

Land Pride 309-100M Troubleshooting, Table of Contents, Problem, Belt slipping, Patches of uncut grass, Gearbox noisy

Contents

Table of Contents FM2060 & FM2072you see this symbol, the subsequent Flail MowersTable of Contents Important Safety InformationSafety at All Times Look For The Safety Alert SymbolImportant Safety Information Table of ContentsTable of Contents Important Safety InformationUse Safety Lights and Devices Practice Safe MaintenanceTable of Contents Important Safety InformationPrepare for Emergencies Wear Protective EquipmentSafety Labels 818-130C818-230C 818-540C818-543C 818-552CTable of Contents Important Safety Information818-558C 818-556CTable of Contents Important Safety InformationUsing This Manual ApplicationOwner Assistance IntroductionHitch Assembly Section 1 Assembly and Set-upTractor Requirements Table of ContentsDriveline Installation Table of ContentsTractor Hook-Up Section 1 Assembly and Set-upTransporting Mowing InstructionsOperating Instructions Section 2 Operating InstructionsYou should now be ready to move to the cutting site to begin mowing. You should have inspected and should only be cutting in an area you are familiar with which is relatively free of debris and unseen objects. Never assume an area is clear and extremely tall grass or brush should be cut twice to detect potential hazards. In the event you do strike an object, stop the tractor and cutter immediately to inspect the rotor and make any necessary repairs before resuming operation. It pays to inspect a new area and to develop a plan before you cut Table of ContentsSection 2 Operating Instructions Cutting Height Adjustment 3-PointHitch AdjustmentsSection 3 Adjustments Leveling the MowerMaintenance Service Mowing KnivesSection 4 Maintenance and Lubrication StorageLubrication HoursTable of Contents Section 4 Maintenance and LubricationAs Required Table of ContentsSection 4 Maintenance and Lubrication HoursSection 5 Speciﬁcations & Capacities Table of ContentsFM2060 & FM2072 Series Flail Mowers FM2060Section 6 Features and Beneﬁts Table of ContentsFeatures FM20 SeriesSection 7 Troubleshooting Table of ContentsProblem Belt slippingTorque Values Chart Section 8 AppendixTable of Contents in-tpiTable of Contents Section 8 Appendix20 FM2060 & FM2072 Flail Mowers 309-100M 3/25/08Section 8 Appendix WarrantyTable of Contents