Land Pride

Section 2 Operating

Table of Contents

Parking

The following steps should be done when preparing to store the tiller or unhitch it from the tractor. See also Storage in the “Maintenance and Lubrication” section on page 20 for additional information on long term storage of your tiller.

1.Park the tiller on a level, solid area.

2.Shut off tractor engine and engage parking brake.

3.Set parking stand to desired height to maintain tiller in proper height for re-hook-up and install pin to lock in place.

4.Unhitch from tractor.

5.See Storage in the “Maintenance and Lubrication” section on page 20 if tiller is not going to be used for an extended period of time.

Operating Instructions

Before using your Land Pride RTA10 or RTA15 Series Rotary Tiller, you should have completely read the Operator’s Manual, properly attached the Tiller to the tractor, cut the driveline to proper length, Run-in the clutch, and gone through the Operating Checklist. If you have missed any of these steps, please complete them before proceeding.

Now that you have properly prepared yourself and your tiller, it’s time to do some tilling. Carefully drive the tractor to the site where you intend to till. You should have already cleaned this site of any large limbs, rocks, trash, metal or other debris. Best results will be achieved if you have mounted your tiller offset to the right far enough to cover the tread of your right tractor wheel. Line the tractor up just to the right of center on your tillage plot. You will be working from the center out and always turning to the right to line up for your next pass.

Lower the tiller half way to the ground and reduce your tractor engine speed to about one quarter throttle. Engage the PTO and gradually increase the engine speed until you reach full PTO speed of 540 rpm. Lower the Tiller to the ground and simultaneously commence forward travel of approximately 2 mph. Do not make turns or attempt to back up while tiller is in the ground. See important note below.

IMPORTANT: Turning or backing up with rotary tines in the ground will damage the tiller.

Travel about 50 ft. and then stop to check your results. When stopping, remember to lift the tiller out of the ground, stop the tractor, reduce engine speed, disengage the PTO, set the park brake, shut off the tractor, and remove the keys. If you are tilling too shallow or too deep, adjust the skid shoes accordingly. If the soil texture is too coarse, lower the leveling door and reduce your ground speed. If the soil texture is too fine, you will need to raise your leveling door and increase your ground speed. For any other problem conditions that may arise, you will want to refer to the Troubleshooting section on page 26.

When you are done tilling for the day, make sure you use proper tractor shut down procedures before you get off of the tractor. If you are detaching your tiller, make sure you park it on a dry and level surface leaving it clean and ready for the next use. When you put your tiller up for the season, make sure you refer to the Storage Directions on page 20.

With a little practice and a few adjustments, you will soon be achieving the results you want with your Land Pride Rotary Tiller. See “Features and Benefits” Section 6 or “Specifications and Capacities” Section 5 for additional information and performance enhancing options.

10/13/08

RTA10 & RTA15 Series Rotary Tillers 311-252M

13

Page 14 Page 16
Page 15
Image 15
Land Pride 311-252M manual Parking, Operating Instructions
Page 14 Page 16

311-252M specifications

Land Pride, a well-respected name in the agricultural and landscaping equipment industry, has developed a reputation for creating high-quality products that cater to the needs of farmers, landscapers, and landowners. One of their standout offerings is the 311-252M mower, which combines innovative technology with robust design to deliver effective mowing performance.

The Land Pride 311-252M is a commercial-grade mower designed specifically for mid-sized tractors. Its key feature is the 60-inch cutting deck which provides an optimal balance between maneuverability and cutting efficiency. This makes it ideal for tackling a variety of mowing tasks, whether in vineyards, orchards, or residential lawns. Its reinforced deck ensures durability and can withstand the rigors of frequent use in diverse environments.

One of the hallmark technologies of the 311-252M is its adjustable cutting height feature. Users can easily modify the cutting height from 1.5 inches to 4.5 inches, allowing for precision mowing tailored to different grass types and seasonal conditions. Coupled with high-performance blades, the mower provides a clean and even cut, promoting healthy grass growth.

The Land Pride 311-252M is equipped with a quick-attach system that allows for easy attachment and detachment from the tractor. This user-friendly design simplifies the workflow for landowners who need to switch between different implements frequently. Additionally, the mower's side discharge feature helps to reduce clumping and maintains a neat finish across the mowing area.

Safety is a paramount concern in design, and Land Pride incorporates several safety features into the 311-252M. The mower includes a protective shield around the cutting deck, minimizing the risk of debris being thrown during operation. It also has clearly marked safety decals, ensuring operators are aware of necessary precautions while using the equipment.

In summary, the Land Pride 311-252M mower epitomizes a blend of advanced technology, ergonomic design, and robust construction. Its versatility, ease of use, and safety features make it a valuable asset for anyone looking to maintain their landscape efficiently. Whether tackling residential projects or professional mowing jobs, the 311-252M is an excellent choice that reflects Land Pride's commitment to quality and performance in outdoor power equipment.
Top Page Image Contents