Land Pride

Table of Contents

Section 1 Assembly and Set-Up

4.Install driveline guard (#10) to the top of the 3-point hitch plates with four 1/4” wing screws (#11).

NOTE: Remove driveline guard for easier access to the driveline at the gearbox.

5.Mount left hand clevis (#15) over square tube as shown. Make certain longer chamfer is positioned on the bottom.

6.Locate u-bolt (#16) behind the square tube and insert through clevis (#15) holes as shown.

7.Secure with 1/2”-13 hex nylock nuts (#17). Do not tighten nuts at this time.

8.Drive 1/4” x 1 3/4” rollpin into pin (#19) into 1/4” hole into lower hitch pin (#18).

9.Insert lower hitch pin into clevis and secure with linch pin (#20).

10.Repeat step 5 through 9 for the right hand clevis.

11.Position clevis 26 7/8” apart from inside of clevis plate to inside of clevis plate and center off the gearbox input shaft. When offsetting tiller to the right, see “RTA10 Tiller Hitch Offset” or “RTA15 Tiller Hitch Sideshift” on page 14.

12.Tighten 1/2” nuts (#17) to the correct torque.

13.Install manual tube (#21) to hitch plate (#7) with two 1/4”-20 x 1 GR5 hex head cap screws (#22), SAE flat washers (#23) and hex nylock nut (#24).

14.Tighten 1/4” cap screws (#22) to the correct torque.

15.Insert u-bolt (#26) through chain (#25).

16.Install two 3/8” nuts (#27), two lock washers (#28) and flat washers (#29) onto the u-bolt an equal distance from the end.

17.Insert u-bolt through deflector shield and secure with tow 3/8” flat washers (#29) and hex nuts (#27). Tighten nuts to the correct torque.

18.Attach opposite end of chain to slot in tiller frame above.

Leg Stand Assembly

Refer to Figure 1-1:

1.Insert leg stand (#13) into leg stand holder on the end of the tiller frame.

2.Adjust to the desired height and pin with 1/4” x 1 3/4” long wire lock pin (#14).

IMPORTANT: The three upper holes are used for parking the tiller and the bottom hole is used when the tiller is in use.

Tractor Hook-Up

Refer to Figure 1-2:

1.When using tractors with multi-speed PTO, be certain PTO is set for 540 rpm.

2.Back tractor up to tiller until lower 3-Point links are aligned with hitch clevises on tiller.

3.Secure the tractor’s 3-Point lower links to the lower hitch clevises using 7/8" diameter hitch pins.

4.Secure the tractor’s top link to the tiller top hitch using a 3/4" diameter hitch pin (supplied by customer).

Adjust tractor top link in order to level the tiller.

5.Adjust the tractor’s 3-Point hitch lift height so that the tiller tines are not lifted more than 14 inches off the ground to prevent damage to the driveline u-joints.

!WARNING

Lifting unit more than 14” high while PTO is engaged may damage driveline components.

22191

Tractor Hook-Up

Figure 1-2

10/13/08

RTA10 & RTA15 Series Rotary Tillers 311-252M

9

Page 11
Image 11
Land Pride 311-252M manual Leg Stand Assembly, Tractor Hook-Up

311-252M specifications

Land Pride, a well-respected name in the agricultural and landscaping equipment industry, has developed a reputation for creating high-quality products that cater to the needs of farmers, landscapers, and landowners. One of their standout offerings is the 311-252M mower, which combines innovative technology with robust design to deliver effective mowing performance.

The Land Pride 311-252M is a commercial-grade mower designed specifically for mid-sized tractors. Its key feature is the 60-inch cutting deck which provides an optimal balance between maneuverability and cutting efficiency. This makes it ideal for tackling a variety of mowing tasks, whether in vineyards, orchards, or residential lawns. Its reinforced deck ensures durability and can withstand the rigors of frequent use in diverse environments.

One of the hallmark technologies of the 311-252M is its adjustable cutting height feature. Users can easily modify the cutting height from 1.5 inches to 4.5 inches, allowing for precision mowing tailored to different grass types and seasonal conditions. Coupled with high-performance blades, the mower provides a clean and even cut, promoting healthy grass growth.

The Land Pride 311-252M is equipped with a quick-attach system that allows for easy attachment and detachment from the tractor. This user-friendly design simplifies the workflow for landowners who need to switch between different implements frequently. Additionally, the mower's side discharge feature helps to reduce clumping and maintains a neat finish across the mowing area.

Safety is a paramount concern in design, and Land Pride incorporates several safety features into the 311-252M. The mower includes a protective shield around the cutting deck, minimizing the risk of debris being thrown during operation. It also has clearly marked safety decals, ensuring operators are aware of necessary precautions while using the equipment.

In summary, the Land Pride 311-252M mower epitomizes a blend of advanced technology, ergonomic design, and robust construction. Its versatility, ease of use, and safety features make it a valuable asset for anyone looking to maintain their landscape efficiently. Whether tackling residential projects or professional mowing jobs, the 311-252M is an excellent choice that reflects Land Pride's commitment to quality and performance in outdoor power equipment.