Display assembly
Description | Spare part number |
|
|
| |
backlit, HD BrightView display panel, bezel, enclosure, hinges, camera module and cable, |
|
microphone and cable, and 2 wireless antenna transceivers and cables) |
|
|
|
For the Presario CQ71 Notebook PC use | |
|
|
For the HP G71 Notebook PC use | |
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 47).
5.Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 48).
6.Remove the following components:
a.Keyboard (see Keyboard on page 60)
b.Keyboard cover (see Keyboard cover on page 63)
Remove the display assembly:
1.Open the computer as far as possible.
2.Disconnect the display panel cable (1) from the system board and remove the cable from the cavity between the system board and the display left hinge.
3.Disconnect the microphone module cable (2) from the system board.
66 Chapter 4 Removal and replacement procedures
