Optical drive
NOTE: The optical drive spare part kit includes an optical drive bezel.
Description | Spare part number |
|
|
DVD±RW and | |
|
|
|
|
Before removing the optical drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 47).
Remove the optical drive:
1.Remove the PM2.5×7.0 retention screw (1) to release the optical drive from the computer.
2.Insert a paper clip (2) to extend the disc tray.
3.Grasp the tray and slide the optical drive (3) out of the optical drive bay.
To insert the optical drive, insert the rear edge of the optical drive into the optical drive bay and slide it in until the optical drive is seated.
Component replacement procedures 53
