Land Pride

Table of Contents

Section 1 Assembly and Set-Up

Lower Link Hitch Bracket Installation

1.Install right hand (#2) and left hand (#1) lower link hitch brackets with bolts (#3) flat washers (#5) and lock nuts (#4). Assemble hitch pins (#7) to hitch brackets as shown. Refer to Figure Figure 1-8.

Lower Hitch Brackets

5.Raise the boom to take the tension off of the boom lock so you can release the lock. Refer to Figure 1-6.

Transport Lock

20566

Transport Lock

Figure 1-6

6. Remove the pin (#4) and connect dipper cylinder (#3),

re-install pin (#4), bolt (#1) & lock nut (#2). Refer to

Figure 1-7.

Figure 1-8

19369

2.Back tractor against backhoe in mounting position.

3.Connect tractor’s upper 3-point to backhoe.

4.Apply hydraulic power to the backhoe.

Dipper Cylinder

Installation

Figure 1-7

20569

!CAUTION!

Keep all people clear of your work area during the next steps. Until the backhoe is securely mounted, the operator should make sure that no portion of his body is beneath any part of the backhoe.

10/28/05

13

Page 15
Image 15
Land Pride BH2585 manual Transport Lock, Lower Link Hitch Bracket Installation