Table of Contents
Important Safety Information
Safety Labels
Your Seeder comes equipped with all safety labels in place. They were designed to help you safely operate your Seeder. Read and follow their directions.
1.Keep all safety labels clean and legible.
2.Replace all damaged or missing labels.
3.Some new equipment installed during repair requires safety labels to be affixed to the replaced component as specified by Land Pride. When ordering new components make sure the correct safety labels are included in the request. To order new labels go to your Land Pride dealer.
4.Refer to this section for proper label placement. Install new decals as follows
a.Clean the area on which the decal is to be placed.
b.Spray soapy water on the surface where the decal is to be placed.
c.Peel backing from decal. Press firmly on surface, being careful not to cause air bubbles under decal.
d.Squeeze out air bubbles with the edge of a credit card.
| ||
18888 | DANGER: Guard Missing | |
(Beneath Guard) | ||
| ||
| ||
18888 | DANGER: Keep away, | |
| Moving Parts |
|
|
|
|
|
|
| SMV: Slow Moving Vehicle |
|
|
| 18888 |
4 | PS1548 & PS1572 Primary Seeder | 7/22/05 |
