Land Pride
Section 3: Adjustments
Table of Contents
Drive Chain
Refer to Figure
The tension on the drive chain can be easily adjusted by using the chain tightener stud. Should backlash occur, loosen the nut and torque the stud counterclockwise to 20 - 30 foot pounds and tighten nut to 400 foot pounds.
Rear Deflector
Refer to Figure
The rear deflector (#1) can be adjusted closer to the ground to produce a fine soil texture or can be raised to produce a coarse soil texture. Adjust the chain length by repositioning the chain (#2) in slot “A”. The chain should be secured to the rear deflector with wire retaining
pin (#3).
22251 |
Chain Tightener
Figure |
22250 |
Rear Deflector
Figure
5/05/06 | RTR10 & RTR15 Series Rotary Tillers | 17 |