Land Pride RTR1058 Rear Deflector Assembly, Table of Contents, Tractor Hook-Up, Refer to Figure

Models: RTR1542 RTR1050 RTR1042 RTR1558 RTR1058 RTR1550

1 34
Download 34 pages 40 b
Page 13
Image 13
Rear Deflector Assembly

Land Pride

Table of Contents

Section 1: Assembly and Set-Up

Rear Deflector Assembly

Tractor Hook-Up

Refer to Figure 1-3:

Refer to Figure 1-4:

Attach Chain (#2) to rear deflector (#1) with wire retaining pin (#3). Place 2nd chain loop on opposite end of chain into slot “A”.

22250

Rear Deflector

1.Some tractors are equipped with multi-speed PTO ranges. Be certain your tractor PTO is set for 540 rpm.

2.Back tractor up to tiller until lower 3-Point links are aligned with the hitch clevises on the tiller.

3.Secure tractor’s 3-Point lower links to the lower hitch clevises using 7/8" diameter hitch pins.

4.Secure the tractor’s top link to the tiller top hitch using a 3/4" diameter hitch pin (supplied by customer). Adjust tractor top link in order to level the tiller.

5.Prevent damage to the driveline u-joints by adjusting the tractor’s 3-Point lift height so that the tiller tines are not lifted more than 14 inches off the ground.

!WARNING

Damaged drivelines could cause serious injury or death.

IMPORTANT: PTO operation and/or engagement with unit higher than 14” will damage driveline components. See Figure 1-4.

Figure 1-3

22248

Tractor Hook-Up

Figure 1-4

5/05/06

RTR10 & RTR15 Series Rotary Tillers 311-431M

11

Page 13
Image 13
Land Pride RTR1058 Rear Deflector Assembly, Damaged drivelines could cause serious injury or death, Table of Contents