Table of Contents

Section 1: Assembly and Set-Up

Land Pride

Hitch Assembly

Refer to Figure 1-1 on page 9:

1.Install both top 3-point hitch plates (#1 and #2) outside of gearbox mounting frame with 5/8” x 1 3/4” long bolts (#3), 5/8” lockwashers (#4), and 5/8” nuts (#5). Do not tighten hardware at this time.

2.Install spacer (#6) between upper 3-point hitch plates (#1 & #2) with 3/4” x 4” long bolt (#7), 3/4” lockwasher (#8) and 3/4” nut (#9).

3.Securely tighten all bolts. Refer to the Torque Values Chart in the “Appendix” section on page 29.

4.Mount left hand clevis (#13) over the square tube as shown. Make certain the longer chamfer is positioned on the bottom.

5.Locate u-bolt (#16) behind the square tube and insert through clevis (#13) holes as shown.

6.Secure with 1/2” hex locknuts (#14). Do Not Tighten.

7.Repeat steps 4 through 6 for the right hand clevis.

8.Position clevises 26 7/8” apart from inside of clevis plate to inside of clevis plate and center off the gearbox input shaft as shown.

9.Tighten 1/2” locknuts (#14) to the correct torque. Refer to the Torque Values Chart in the “Appendix” section on page 29.

Leg Stand Assembly

Refer to Figure 1-1 on page 9:

1.Insert leg stand (#10) into leg stand holder on the end of the tiller frame.

2.Adjust to the desired height and pin with 1/4” x 1 3/4” long wire lock pin (#11).

IMPORTANT: The three upper holes in the leg stand are used for parking the tiller. Before tilling, remove leg stand from holder, turn leg stand upside down and replace it through the top of the holder. Secure leg stand in holder using one of the upper three holes.

Front Deflector Assembly

Refer to Figure 1-2

1.Remove 3/8” x 1 1/2” bolts (#1), washers (#2), lockwashers (#6), hex nuts (#7) and two front deflector mounting bars (#3 & #5) from the tiller frame.

2.Insert 3/8” x 1 1/2” hex head bolts (#1) through 3/8” flat washers (#2), upper front deflector mount bar (#3), front rubber deflector (#4) and mounting holes “A”.

3.Secure to tiller with lower front deflector mount bar (#5), 3/8” lock washers (#6) and 3/8” hex nuts (#7).

4.Securely tighten all bolts. Refer to the Torque Values Chart in the “Appendix” section on page 29.

22253

Figure 1-2

10 RTR10 & RTR15 Series Rotary Tillers 311-431M

7/22/08

Page 12
Image 12
Land Pride RTR1550, RTR1558 manual Hitch Assembly, Leg Stand Assembly, Front Deflector Assembly

RTR15, RTR1558, RTR1550 specifications

Land Pride is a renowned name in the agricultural equipment industry, and their range of Rotary Tiller models, including the RTR1558, RTR1058, RTR1550, RTR1042, and RTR1542, stands out for their efficiency, robustness, and innovative design. These tillers are ideal for both commercial farmers and garden enthusiasts, offering flexible solutions for soil preparation.

The RTR1558 and RTR1550 models, designed for larger tractors, boast a heavy-duty construction and are equipped with a wide cutting width, allowing them to cover more ground in less time. This efficiency is complemented by a series of rotor knives that ensure a thorough tilling action, breaking up compacted soil while enabling better aeration and nutrient absorption. The RTR1558 features a unique gear-driven design that enhances durability and performance, making it suitable for heavy-duty applications.

For those with smaller tractors, the RTR1042 and RTR1542 models are a perfect fit. These tillers maintain a robust design while being lightweight, ensuring they can be easily maneuvered in smaller plots. With their effective rotary tilling capabilities, they help prepare seedbeds, enhance garden spaces, and efficiently mix in organic matter or fertilizers. These models also feature adjustable tilling depths, allowing users to customize the tilling process according to specific soil conditions.

The RTR1058 model, meanwhile, serves as a middle ground, delivering a balance between power and versatility. This rotary tiller’s unique design allows it to perform exceptionally well in various soil types, promoting better crop yields. Each of these tillers is equipped with a durable chain drive system that provides optimal performance and minimal downtime.

Additionally, Land Pride’s focus on user-friendly features extends to the ease of maintenance. The equipment is designed with accessible components that simplify repairs and reduce pivot point wear. Coupled with the innovative technology in their design, such as the heavy-duty frame and reinforced tines, these tillers provide long-term reliability.

In conclusion, the Land Pride RTR1558, RTR1058, RTR1550, RTR1042, and RTR1542 rotary tillers exemplify cutting-edge technology and thoughtful engineering. Their unique features make them suitable for a variety of applications, ensuring that whether you are tilling a large field or preparing a small garden, there is a Land Pride tiller that meets your needs effectively.