Lanier CP-282 manual Material Safety Data Sheet, Emergency Telephone, Hazards Identification

Models: CP-282

1 3
Download 3 pages 8.2 Kb
Page 1
Image 1
MATERIAL SAFETY DATA SHEET

Lanier Worldwide, Inc.

2300 Parklake Drive, NE

Atlanta, GA USA 30345-2979

MATERIAL SAFETY DATA SHEET

Emergency Telephone: 800-526-4371

Section 1: Chemical Product and Company Information

Identity:

TDC10 Black Toner Cartridge

MSDS No.

CP- 282

Product ID:

117-0191

Issued:

06/15/2004

Synonyms

 

Supersedes:

05/08/1995

TDC-10 Toner Developer Cartridge

Date:

06/15/2004

& Common

Black Toner for

Prepared by:

EH&S Department 770-496-9500

Names:

Lanier 6610

Approved by:

Larry Choskey, Manager, CEH&S

Uses:

 

European

Walter Fricke, Manager, Safety &

Lanier 6610 Copier

Contact:

Environment,

Chemical

 

 

Lanier Worldwide, Inc.

 

 

Im Taubental D-41468 Neuss,

Formula:

Mixture

 

Germany +49-2131-387-177

Section 2: Composition / Information on Ingredients

Toner Component

Percent

CAS No.

Exposure Limits

Source

Styrene acrylate copolymer

92

25767-47-9

Not listed

n/a

Carbon black

4

1333-86-4

3.5mg/m3

OSHA PEL

 

 

 

3.5mg/m3

ACGIH TWA

Organic pigment

4

8005-02-5

Not listed

N/a

Developer Component

93.5

7439-89-6

Not listed

N/a

Iron powder

Carbon black

0.3

1333-86-4

3.5mg/m3

OSHA PEL

Difluorethylene polymer

0.5

24937-79-9

3.5mg/m3

ACGIH TWA

Not listed

N/a

Styrene acrylate copolymer

5.5

25767-47-9

Not listed

n/a

Organic pigment

0.2

8005-02-5

Not listed

N/a

*PEL as the product: 15mg/m3 (total dust), 5mg/m3 (respirable dust)

*TLV as the product: 10mg/m3 (total dust), 5mg/m3 (respirable dust)

 

Section 3: Hazards Identification

 

HMIS Rating:

HEALTH = 1

 

FLAMMABILITY = 1

 

REACTIVITY = 0

SPECIAL = none

 

Health Hazards (Acute, Chronic, Immediate and Potential): Minimum irritation to respiratory tract may occur as with exposure to any non-toxic dust. May cause gasping if inhaled. Inhalation should be avoided. May cause temporary eye discomfort.

Health Hazards of Long Term exposure (Chronic): Prolonged inhalation of excessive dust may cause lung damage. It is attributed to “lung overloading”, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust.

Carcinogenicity: Carbon Black was reclassified as a Group 2B by the IARC in 1996 based upon the result of only the inhalation study in rats. However, there was not observed the incidence of tumors on the test results on dermal or oral studies. Also, 2-years inhalation study using a typical toner containing carbon black showed no association between toner exposure and animal tumors.

Section 4: First Aid Measures

Inhalation:

Gargle with water. Remove to fresh air if effects

Eye Contact:

In case of contact, immediately flush eyes

occur. Get medical attention if needed.

with water for 15 minutes. Get medical

Skin Contact:

Wash with soap and water.

Ingestion:

attention if needed.

Dilute stomach contents with several

 

 

 

glasses of water. Get medical attention.

 

Section 5: Fire Fighting Measures

 

Suitable extinguishing media: CO2, dry chemical, foam or water.

Extinguishing media which may not be used for safety

 

 

reasons: none

Special protective equipment for fire fighters: none

 

 

UEL: n/a

LEL: n/a

 

 

y o u r d o c u m e n t m a n a g e m e n t p a r t n e r

Page 1
Image 1
Lanier CP-282 manual Material Safety Data Sheet, Emergency Telephone, Hazards Identification, First Aid Measures