AMPLIFIER FEATUER DESCRIPTIONS
~Z760fNU'XPZ960 Z CHANNELAMPUFIERS
The X..oVER slide switch selects the intermal crossover functions:
-The input signal is routed directiy to the UNE OUT RCAjacks. regardless of the
•HP: Selects the built in HIGH PASS filter. variable from 40 Hz to 2KHz.
•FlAT: Bypasses all crossovers for full frequency range operation.
LP: Selects the built in LOW PASS filer. variable from 30 Hz to 150Hz. Note that the LOW PASS signal is MONO
-In the LP position. the HIGH PASS filter acts as a subsonic filter. When the LP mode is selected. a 0 to + I 0 dB. at 45 Hz. BASS EO is also switched in.
The REMOTEjack enables dash mount level control of the LOW PASS signal.
~4Z60 | 4 CHANNEL AMPLIFIERS |
The AMPLIFIER CH I/ZCH
channel pair 1& 2:
•HP: Selects the built in HIGH PASS filter. variabe from 40 Hz to 2KHz.
·FULL: Bypasses all crossovers for full frequency range operation.
·LP: Selects the built in LOW PASS filter. variabe from 30 Hz to 150Hz. Note that the LOW PASS signal is MONO.
-When the LP mode is selected. a 0 to + I 0 dB. at 45 Hz. BASS EO is also switched in.
The AMPLIFIER CH 3/CH 4
•HP: Selects the built in HIGH PASS fiter. variable from 40 Hz to 2KHz.
·FULL: Bypasses all crossovers for full frequency range operation.
·LP: Selects the built in LOW PASS filter. variabe from 30 Hz to 150Hz. Note that the LOW PASS signal is MONO.
-When the LP mode is selected. a 0 to + I 0 dB. at 45 Hz. BASS EO is also switched in.
-Full range signal from channels I I 2 inputs are routed to the Une OUT RCA jacks. regardless of the setting of the
-The REMOTEjack enables dash mount level control of the LOW PASS Signal. CH3/40nly.
FEATURES
•Bass Boost Circuit
•Variable low Pass Crossover
•Anti-Thump Turn-On
•
•Soft Turn On/Off
•RCA Une Input
•Blue light Illuminated lanzar Logo
•Power Protection LED Indicators
•Advanced Protection Circuitry
•Bass Boost Remote Control
•THD: <0.05%
•SIN Ratio: >95dB
•Frequency Response:
-
