Lathem 2000 manual Setting Decimal Wheel with Tenths

Mechanical Time Recorder User’s Guide

Setting Decimal Wheel with Tenths

Figure 4

Use only for recorders printing in tenths (models with a 4th digit of “2” or “5”)

1. Rotate Tenths Wheel (0.9) Figure 4.1 until it is set at “9”. Rotate the Main Setting Wheel Figure 4.3 until the Tenths Wheel moves to a “0”. (This is the zero minute.)

2. Set the Hour Wheel Figure 4.2 to the current Hour.

3.Rotate the Clock Face Setting Wheel Figure 4.3 to set the hands to match the time set on the wheels.

4.Rotate the Main Setting Wheel to advance both the Clock Face and Print Wheels together. Rotate until you pass the actual time by one minute (each “click” indicates one minute.)

For example, at 10:05, rotate 5 times = 5 clicks = 5 minutes past ten o’clock.

5.Hold the corner of the Clock Face and release the Release Latch by pushing it to the left. Slowly let the Type Section down and press it firmly into the Type Section Headlock.

6.Make a sample registration and verify the time and date or day is correct.

7.Replace and lock the case cover

Page 7