Lathem 4000 manual

2000 – 4000 Series Time Recorder User’s Guide

If your model prints Tenths, (models with the 4th digit of 2 or 5), go to the section “Setting Decimal Wheel with Tenths”.

If your model prints Hundredths or 00-23 hours, refer to the Dial of Decimal Equivalents in Figure 3 (page 5) to determine the correct setting.

Note: if your machine records in 1-12 hours, the PM hours are underlined. AM hours are not underlined. Set time to the proper hour of the day to avoid errors such as setting the day wheel to the next day at noon rather than midnight.

3.Rotate the Minute Wheels to show the current minute.

4.Set the Hour Wheel to the current hour

5.Rotate the Clock Face Setting Wheel – Figure 5.1 (page 7), to set the hands to match the time set on the wheels.

6.Rotate the Main Setting Wheel – Figure 2, 2.1 to advance both the Clock Face and Print Wheels together. Rotate until you pass the actual time by one minute (each “click” indicates one minute.)

7.Hold the corner of the Clock Face and release the Release Latch – Figure 2, 2.2 by pushing it to the left. Slowly let the Type Section down and press it firmly into the Type Section Headlock.

8.Make a sample registration and verify the time and date or day is correct.

9.Replace and lock the case cover.

Note: The month wheel and the date wheel must be reset manually at the beginning of each month.

Page 4