2000 – 4000 Series Time Recorder User’s Guide
Setting Decimal Wheel with Tenths
Figure 4
Use only for recorders printing in tenths (models with a 4th digit of “2” or “5”)
1Rotate Tenths Wheel (0.9)– Figure 4, 4.1 until it is set at “9” Rotate the Main Setting - Figure 4, 4.3 until the Tenths Wheel moves to a “0”. (This is the zero minute.)
2. Set the Hour Wheel – Figure 4,
4.2 to the current Hour.
3. Rotate the Clock Face Setting Wheel – Figure 5, 5.1 to set the hands to match the time set on the wheels.
4.Rotate the Main Setting Wheel – Figure 4, 4.3 to advance both the Clock Face and Print Wheels together. Rotate until you pass the actual time by one minute (each “click” indicates one minute.)
For example, at 10:05, rotate 5 times = 5 clicks = 5 minutes past ten o’clock.
5.Hold the corner of the Clock Face and release the Release Latch by pushing it to the left. Slowly let the Type Section down and press it firmly into the Type Section Headlock.
6.Make a sample registration and verify the time and date or day is correct.
7.Replace and lock the case cover
Page 6
