LTRx-512 User’s Guide
Press Schedule Number [1] - [8]. Normally, start with [1]
The following will show on the display:
For Firmware version 4.05 and earlier:
For Firmware version 4.06 and later:
To select the appropriate mode:
Press [1] DATA ENTRY to create a new schedule
Press [2] DATA SCAN to view a schedule
Press [3] DATA EDIT to change a schedule
Press [4] CLEAR to clear all records in the selected schedule
When you choose [2] DATA SCAN, you can view events. You can use these scan keys:
Scan Key Description
[9] 1ST Go to the 1st event (in ascending time order)
[3] PRV View the previous event
[#] NXT View the next event
[*] EXIT End and exit
When you choose [3]DATA EDIT, you can view, edit or delete events. You can use the
keys above, plus these edit keys:
Edit Key Description
[1] EDIT Edit the displayed event
[4] DEL Delete the displayed event
[6] ADD Add a new event
When you choose [1]DATA ENTRY, you can create a schedule. Follow the steps below to
create a schedule
SELECTED SCHEDULE # 1
SELECTED MODE = ENTRY
ZONE TYPE = BELL
PRESS [#] TO EXECUTE
11