Manuals
/
Lava Computer
/
Computer Equipment
/
Network Card
Lava Computer
650 installation manual Setting LavaPort Data Rates in Windows
Models:
650
1
10
20
20
Download
20 pages
44.25 Kb
7
8
9
10
11
12
13
14
<
>
Install
Setting LavaPort Data Rates in Windows
The data rate of the LavaPort may be set using the Bits per Second pull down menu
Page 10
Image 10
Setting LavaPort Data Rates in Windows
10
Page 9
Page 11
Page 10
Image 10
Page 9
Page 11
Contents
Rev. B01
LavaPort Installation Manual
SSERIAL PCI P.N. MOKO L74.1 MADE IN CANADA LAVA COMPUTERS
Contents
Quick Install
Windows 95/98/ME/2000/XP
Hardware Installation
Screw for attaching card bracket to PC casing Port PCI Slot
Windows Installation
Windows Driver Installation
Page
5. Click Properties. The following screen will appear
Modifying the Com numbering and IRQ of your Port
2a. For Windows95/98/ME, you may use the Lava Port Redirect Utility provided in the Utils subdirectory of your LavaPort diskette. This utility may be run from the diskette or installed onto your hard drive. To install the Lava Port Redirect utility on your hard drive, insert the LavaPort diskette into your floppy drive, click Start, Run and type A\Utils\Setup
Setting LavaPort Data Rates in Windows
The data rate of the LavaPort may be set using the Bits per Second pull down menu
Lava Modem Speed Set for Windows
Page
Setting LavaPort FIFO Control in Windows
The LavaPort-650 uses a 16650 UART incorporating a 32-byte FIFO first- in first-out buffer
Setting LavaPort Flow Control in Windows
Windows NT 4.0 Installation
Windows NT Driver Installation
Setting a 230.4 kbps Data Rate
This page intentionally blank
900 am to 530 pm Monday to Friday Eastern Time Tel +416 Fax + 416
Lava Technical Support
Lava Computer MFG Inc
E-mail tech@lavalink.com