Lava Computer 650 installation manual Windows NT 4.0 Installation, Windows NT Driver Installation

Windows NT 4.0 Installation

Note: Make sure that you are installing the correct LavaPort-650

drivers for the appropriate operating system.

DO NOT install Windows 3.x/95/98/Me/2000/XP drivers

under Windows NT

Windows NT Driver Installation

1.Once the LavaPort-650 is installed in your PC, turn your computer on and start NT.

2.Place the LavaPort installation diskette into your floppy drive and select Run from the Start Menu. When prompted type: A:\NT4.0\Setup.

3.After the necessary files have been copied, select My Computer and start Control Panel. A new icon will appear called“LavaPort”.This applet should now be used to configure ALL Com Ports in your PC - not just LavaPorts.

17