Using Access Control, Entering & Exiting

Option [8]: Access to Armed Access Control Doors

When option [8] is enabled, the Access Control Card can be used to open an armed Access Control Door. When a valid Access Control Card is presented to a reader that is assigned to a zone and the zone is armed, access will be granted and the Entry Delay will begin. When option [8] is ON, extra security is provided since a user must enter a User Access Code to disarm the area.

For option [8] to function in the ON position, option [5] “Arm Only” in the User Options (refer to section 5.4 on page 11) and option [2] “ Disarming with Access Card” in the Access Control User Options (refer to section 5.5 on page 11) must be disabled.

6.0USING ACCESS CONTROL

6.1ENTERING & EXITING

Depending on how your system is installed, there are various ways to enter and exit Access Control Doors:

1.Present your Access Control Card to the reader. The system will verify that the card is allowed access according to its assigned Access Level and Schedule. If it is accepted, the system will unlock the door. The reader’s light can be pro- grammed by the installer to turn green or extinguish briefly to indicate that the door can be opened. The reader can also be programmed by the installer to audi- bly inform you that the door can be opened.

2.When the motion detector detects movement (Request for Exit), it will unlock the door to permit passage from inside.

3.Enter your User Access Code on a keypad and press [ACC].

4.If the Access Control Door is on a “Door Unlocked Schedule”, you may be able to open Access Control Doors without using a User Access Code or an Access Con- trol Card. Depending on the door’s programming, the door can remain unlocked during the entire programmed schedule or the door can unlock once a valid Access Control Card is presented to the reader during the schedule and then will remain unlocked for the remainder of the schedule.

6.2ARMING AND DISARMING WITH CARD

6.2.1ARMING WITH CARD

An Access Control Card can be programmed to arm areas assigned to the door when it is presented to the reader (door) twice within approximately 5 seconds without opening the door.

The Access Control card must be:

•presented to a door during its assigned Schedule (refer to step 8 in Figure 5.1 on page 9).

•presented to a door within its assigned Access Level (refer to step 8 in Figure 5.1 on page 9).

•programmed to allow arming (options [4] and [5] in section 5.5 on page 11).

•assigned to all areas that are assigned to the Access Control Door (refer to step 7 in Figure 5.1 on page 9), or assigned to at least one of the areas assigned to the Access Control Door depending on how your Installer has programmed the Access Control Door.

6.2.2DISARMING WITH CARD

To disarm and unlock an Access Control Door when the area assigned to it is armed, present your Access Control Card to the reader (door).

The Access Control card must be:

•presented to a door during its assigned Schedule (refer to step 8 in Figure 5.1 on page 9).

•presented to a door within its assigned Access Level (refer to step 8 in Figure 5.1 on page 9).

•programmed to allow disarming (option [2] in section 5.5 on page 11).

12 System Manager’s Manual

DGP2-641 specifications

The LCD Digital DGP2-641 is an advanced display solution aimed at enhancing the user experience in a wide variety of applications. This digital display combines modern technology with user-friendly features, making it an ideal choice for environments that require clear visibility and easy navigation.

One of the standout features of the DGP2-641 is its high-resolution LCD panel. This panel provides crisp and vibrant visuals, enabling users to view information with impeccable clarity. With a resolution that supports detailed graphics, it is suitable for applications ranging from industrial controls to consumer electronics. The bright backlighting technology ensures that screen content remains visible in varying lighting conditions, which is crucial for outdoor or well-lit environments.

Additionally, the DGP2-641 incorporates touch-sensitive capabilities. This interactive feature allows users to engage directly with the display, improving usability and making it intuitive for operation. The touchscreen interface is designed for responsiveness and ease of use, catering to a broad demographic, from tech-savvy individuals to those less familiar with digital devices.

In terms of connectivity, the LCD Digital DGP2-641 is equipped with multiple input options, including HDMI, USB, and RS232 ports. This versatility ensures that it can easily integrate into existing systems, whether in a home theater setup or in more complex industrial machinery. The added compatibility with various devices enhances its usability, catering to a wide array of needs.

The DGP2-641 also features advanced energy efficiency technologies that not only reduce power consumption but also extend the lifespan of the display. This eco-friendly aspect makes it a sustainable choice for both businesses and consumers looking to minimize their environmental impact.

Moreover, the device’s rugged design provides durability in various applications. Whether used in harsh industrial environments or standard office settings, the DGP2-641 is built to withstand the test of time. Its resistance to dust and moisture protects the internal components, ensuring reliable performance over extended periods.

In conclusion, the LCD Digital DGP2-641 showcases a balance of high-quality visuals, user-friendly interaction, robust connectivity, and sustainable design. These characteristics make it a versatile option for anyone in need of a reliable digital display, seamlessly bridging functionality with modern aesthetics. Whether for commercial, industrial, or personal use, the DGP2-641 is a commendable choice for achieving superior visual communication.

LCD Digital DGP2-641 Using Access Control, Entering & Exiting, Arming and Disarming with Card

Models: DGP2-641