EN |
The direction keys
Eight direction keys (identified by a small arrow near the key) on the operator's keypad are used to manoeuvre the cursor. The direction keys become active when you switch to the second level (by pressing the 
key). The distance measuring key is active in both levels. The functionality of the direction keys depends on the software used.
)The free software supplied is designed to provide the user with basic functionality. Leica Geosystems provides no warranty for this free soft- ware and offers no support for it. Leica Geosystems accepts no liability whatsoever arising from the use of the free software and is not obliged to provide corrections nor to develop updates or upgrades. You can find numerous commercial vendors of soft- ware for a wide range of applications on our homepage.
Transmitting the measurement
If your software supports the direction keys use them | Appendix |
| |
to select the appropriate position for the cursor. |
|
| |
Press the | button briefly to transfer the value | Message codes |
|
from the summary row to the pocket PC / PC. | All message codes are displayed with either | or | |
Press the | botton long to transfer all values from | "Error". The following errors can be corrected: |
|
the display. |
|
|
|
|
|
| |
|
|
|
| Cause | Remedy | ||
For further details please consult your manual for the |
| ||||||
software used. |
|
|
| 156 | Transverse tilt | Hold the instrument | |
|
|
|
| greater than 10° | without any transverse | ||
|
|
|
|
|
| ||
|
|
|
|
|
|
| tilt |
| During data transmission |
|
|
|
| ||
|
| 160 | Main tilt direction, | Measure angle up to | |||
If the data is not confirmed as being successfully |
| angle too high | max. ± 45° | ||||
| (> 45°) |
| |||||
received by the Pocket PC/ PC then no new measure- | 204 | Calculation error | Repeat procedure | ||||
ment can be processed. The Info code "240" appears | 240 | Data transfer error | Repeat procedure | ||||
in the display if no data transmission has taken place | 245 | 2nd button pressed | Establish Bluetooth | ||||
after 2 seconds. Press the | - key and repeat |
| although no Blue- | connection | |||
| tooth connection |
| |||||
the measurement and then transmit it. |
| exists. |
| ||||
|
|
|
|
|
|
|
|
Appendix |
| 20 |
| Leica DISTO™ D330i 776751 en | |||
