Indirect measurement - determining a dis- | Press to stop continuous measurement (2). The |
tance using 2 auxilliary measurements | result is displayed in the summary line, the partial |
| results in the secondary line. |
EN |
e.g. for measuring building heights or widths. It is helpful to use a tripod when measuring heights that require the measurement of two or three measurements.
Press this button four times, the display shows the following symbol . The laser is switched on. Aim at the upper point (1) and trigger the measurement. After the first measurement the value is adopted. Keep the instrument as horizontal as possible.
Press and hold down this button to trigger continuous measurement, sweep the laser back and forth and up and down over the ideal target point.
Indirect Measurement - determining a dis- tance using 3 measurements
1
2
3
Press this button five times; the display shows the following symbol . The laser is switched on.
Aim at the upper point (1) and trigger the measurement. After the first measurement the value is adopted. Keep the instrument as horizontal as possible
Press and hold down this button to trigger continuous measurement, sweep the laser up and
Leica DISTO™ D330i 776751 en
17
Functions