Leica A6 Working with BLUETOOTH®, Timer, The direction keys, Switching on BLUETOOTH® / sending measurements, Switching off BLUETOOTH®, Transmitting the measurement

Timer The direction keys

GB Press and hold TIMER - key {A, 4} until desired time delay has been reached (5 - 60 seconds).

Press DIST - key {A, 1}. Once the key is released the remaining seconds until measurement are displayed. The last 5 seconds are counted down with a beep. After the last beep the measurement is taken.

Special function: Switch off of Beep Pressing MENU - key {A, 10} and MINUS - key

{A, 13} together for 4 sec. switches the Beep off or on.

Working with BLUETOOTH®

Switching on BLUETOOTH® / sending measurements

Aquick press on the BLUETOOTH® - key {A, 14} starts DISTO BLUETOOTH®. The data connection must

then be established out from Pocket PC / PC by the application software. The BLUETOOTH® - icon in the display {B, 14} will continue to blink until this has been successfully completed. BLUETOOTH® automa- tically switches off if the connection to the Pocket PC

/ PC is not established within 240 sec from when the BLUETOOTH® was switched on.

Switching off BLUETOOTH®

BLUETOOTH® switches off as soon as the DISTO™ is switched off.

Eight direction keys (identified by a small arrow near the key) on the operator's keypad are used to manoeuvre the cursor. The direction keys become active when you switch to the second level (by pressing the 2nd key {A, 2}). The distance measuring key is active in both levels. The functionality of the direction keys depends on the software used.

Transmitting the measurement

If your software supports the direction keys use them to select the appropriate position for the cursor. To transmit the measurement press the BLUETOOTH® - key {A, 14}. The measurement is then transmitted to your Pocket PC. For further details please consult your manual for the software used.

During data transmission

If the data is not confirmed as being successfully received by the Pocket PC / PC then no new measurement can be processed. The Info code "240" appears in the display if no data transmission has taken place after 2 seconds. Press the CLEAR - key {A, 9} and repeat the measurement and then transmit it.

Selecting particular values in the display

By using the Min. / Max. function particular measurements can be selected for transmission. The display shows a number of measurements (min., max., last

Working with BLUETOOTH® 8 Leica DISTO™ A6 1.0.0 gb