User Manual
Version 1.0
English
Congratulations on your purchase of a Leica DISTO™. The safety instructions can be
found in a separate booklet, which
accompanies this user manual. The safety instructions along with the
user manual should be read carefully before initial operation.
Helpful Hint: The first and last page including the pictures should be folded out and left open, whilst reading through the manual. Letters and Numbers in braces {} refer to the illustrations.
Content |
|
1 | |
Menu functions................................................... | 3 |
Operation............................................................. | 4 |
Measuring ............................................................ | 4 |
Functions ............................................................. | 5 |
Working with BLUETOOTH®........................... | 8 |
Appendix.............................................................. | 9 |
Start-up
GB
Inserting / replacing Batteries
See figure {C} - Open the positioning bracket. Remove the locking clip and slide the endpiece down. Slide the red locking mechanism to the side and open the battery compartment. Insert new or replace used batteries. Close battery cover, reinsert the endpiece and fix locking clip.
The battery symbol {B, 21} appears permanently blinking in the display when the battery voltage is too low. The batteries should be replaced as soon as possible.
•Pay attention to correct polarity.
•Use alkaline batteries.
•Batteries should be removed if the device will not be used for a long time (danger of corrosion).
When changing the batteries the settings and stack content remain unchanged.
Multifunctional Endpiece
See figure {D}
The device can be used for different measurement situations:
•For measurements from an edge open the posi- tioning bracket until it locks in place.
See figure {E}.
•For measurements from a corner, open the posi- tioning bracket until it locks in place, with a slight
Leica DISTO™ A6 1.0.0 gb | 1 |
|
|
|
|