Objective, Preparation, Attaching the objective

Objective

Tools used

★★ No tools required.

Preparation

1.Remove the protective cap on the optics carrier by turning it.

Attaching the objective

•Hold the objective firmly during assem- bly and disassembly so that it does not

fall onto the stage plate. This applies particu- larly to the 2x planapochromatic objective, which is very heavy. Remove all specimens from the stage plate first.

2.Screw the objective clockwise into the optics carrier.

Leica M series	User Manual	24

Page 24

Image 24

Leica M125 B, M165 C B user manual Objective, Preparation, Attaching the objective

Contents

Living up to Life Copyright Risks arising from, using the microscope for Leica M125 B nameplate Use in clean rooms CleaningGeneral Notes Servicing Important Safety Notes Symbols Used Important informationDisposal Explanatory notes Safety Instructions DescriptionIntended use of instrument Non-intended use Repairs, service work Only original Leica Microsystems spare parts may be usedTransport Integration in third-party products Legal regulations EC Declaration of ConformityHealth risks Careful handling External power supply for the focusing ColumnLeica M165 C B Contents Care, Maintenance, Contact Persons Different Types of ObjectivesLeica TL5000 Ergo Transmitted Light Base Leica M Series Congratulations Step Towards Infinity Fewer cables Maximum Compatibility ObjectivesAll new objectives of the Leica M series are parfocal Tubes On We Go Assembly Base and Focusing Column Assembling the column adapter Assembling the focusing driveTools used Allen key, 3 mm Optics carrier Tools used Assembling the Optics CarrierAllen key, 4 mm Place the optics carrier on the focus Groove Tube Tools usedNo tools required Preparations Eyepieces Tools used PreparationMagnification range Objective PreparationAttaching the objective Unpacking the base Focusing drive and column Bottom using the 4 Allen screwsTL5000 Ergo transmitted light base Base is delivered with the adapter plate Wiring Connections Leica M165 C B New Leica M series features extensiveTerminal for the 50-watt power supply provided Later Cables Cable Duct Feeding the cables Quick Start Guide Fastest Route to Success Overview of an M Series Microscope Adjusting the interpupillary distance Correct interpupillary distanceReference values Look into the eyepieces Using the Eyepieces Dioptric CorrectionIf you do not wear glasses If you wear glasses Focusing Focusing drive can be operated either left- or right-handedFocusing Coarse/fine adjustment Adjusting the Resistance of the Focus Drive Adjusting the resistance Changing the Magnification Zoom ZoomingLook into the eyepieces Focus on the specimen Click Stops and Magnifications Enabling and disabling click stopsMagnifications and fields of view Parfocality More Comfort and Convenience for Your Work Requirements for parfocal workParfocality Enlarge the view to the maximum level Focus on the specimen Iris Diaphragm Closing the iris diaphragmOpening the Iris Diaphragm Eyepieces Magnification Factor of the Eyepieces Following eyepieces are available for the M series Health Notes Potential sources of infection Using the Dioptric Correction Dioptric Correction Adjusting Dioptric Correction and Parfocality Graticules Use Objectives Optical Accessories Different Types of Objectives Achromatic objectivesPlanachromatic objective 1× Achromatic objectives with a long focal length Bases Leica TL5000 Ergo Transmitted Light Base Controls Control for the size of the aperture/ balance Switching the transmitted light base on Leica TL5000 Ergo Transmitted Light Base OperationOff Leica TL5000 Ergo Transmitted Light Base Operation Technical Data Power supply Leica TL5000 Ergo Transmitted Light BaseLight source Connections Appendix Parameter ExampleCalculation example magnification in the binocular tube Care, Maintenance, Contact Persons Warranty benefitsCare Keep accessories in a dust-free place when not in use Cleaning polymer componentsProtection from dirt Dust and dirt will affect the quality of your results