7. Pairing it with your phone
Headsets are connected to phones using a procedure called ‘pairing’. By following a few simple steps, a phone can be paired with a headset in a matter of minutes. ( See fig 3)
1.Put the headset in pairing mode
•When you turn on your Jabra BT2010 for the first time, the headset will automatically start up on pairing mode – i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is constantly lit.
2.Set your Bluetooth phone to ‘discover’ the Jabra BT2010
•Follow your phone’s instruction guide. First make sure that Bluetooth is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a ‘setup,’‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*
3.Your phone will find the Jabra BT2010
•Your phone will find the headset under name “Bluetooth headset”. Your phone then asks if you want to pair with the headset. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with thepasskey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete.
fig 3
12
In case of unsuccessful pairing, put the Jabra BT2010 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light.The LED will flash before the light is constant – keep holding down the button until light is constant.
