If you are using another set of earphones other than the supplied Jabra model, please note that differences in impedance and sensitivity might limit or increase the maximum volume output level.. An impedance level of 16 Ohm is recommended for the best performance.. However, always use extra precaution when using another set of earphones than the original Jabra model..

What the lights mean

The Jabra logo is an indicator light showing the headset status.. Blue indicates that the unit is operating.. Purple indicates you are listening to music.. Green signals that your headset is fully charged, yellow 70% charged and red signals that your power is low..

What you see

What it means

 

 

Solid light:

In pairing mode – see Pairing

 

section

 

 

Slow single flash:

Connected to phone and in

 

standby mode

 

 

Slow double flash:

Connected to phone and

 

active on call*

 

 

Slow triple flash:

Not connected to phone and

 

standby mode*

 

 

Quick double flash:

Incoming/Outgoing call

 

 

Triple flash:

Headset on but not connected

 

to phone*

 

 

5 quick flashes:

Pairing succeeded*

 

 

*BT3030 is equipped with Jabra Discreet Light feature, meaning that light indicator (LED) turns off after 1 min of non-activity.. Headset is still active, and light will flash again after a tap on the answer/end button or any call activity..

english

Jabra BT3030 Bluetooth headset

10

 

Page 11
Image 11
Lennox Hearth BT3030 user manual What the lights mean, What you see What it means