15.0 SPARK GAP
The gap between the spark electrode and the pilot should be 1/8” to 3/16” to produce a good spark. There should be no need to adjust this. If under any circumstances the piezo electric spark fails, the pilot cannot be lit manually.
1/8" to 3/16" Spark Gap
Figure 9 - Proper Spark Gap
Side Piece | Grill fixing holes |
|
Figure 11 - Slide on Side Pieces
3.Ensure the sides are neatly aligned with the glass and secure the sides using two M6 screws for each side as shown in Figure 12. Do not overtighten the screws.
16.0ASSEMBLY OF THE GLASS FACIA
1.Remove the glass panel from all packaging and lay face down on a soft surface. Identify the top and bottom of the glass facia by observing the orientation of the keyhole shaped slots in the facia fixing brackets as shown in Figure 10.
TOP
Figure 10 - Key Hole Slots on Glass Facia
2.Slide on the side pieces ensuring that the grill fixing holes (shown) are aligned towards the top of the glass facia (as shown in Figure 11).
Figure 12 - Secure Side Pieces
4. Position the grill within the two side pieces ensuring a proper fit.
TOP
Figure 13
10 | NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE |