Lennox Hearth EBVI25, EBVI30 manual 2

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW GAS APPLIANCE MANUFACTURED BY LENNOX HEARTH PRODUCTS.

When you purchased your new gas-fired heater, you joined the ranks of thousands of individuals whose answer to their home heating needs reflects their concern for efficiency and our environment. We extend our continued support to help you achieve the maximum benefit and enjoyment available from your new gas-fired heater. It is our goal at Lennox Hearth Products to provide you, our valued customer, with an appliance that will ensure years of trouble-free warmth and pleasure.

Thank you for selecting a Lennox Hearth Products gas-fired heater as the answer to your home heating needs.

Sincerely,

All of us at Lennox Hearth Products

TABLE OF CONTENTS			This appliance complies with National
Introduction ......................................	Page	2	Safety Standards and is tested and listed
			by OMNI-Test Laboratories Inc.; Beaverton,
General Information ..........................	Page	2	Oregon (Report No. 116-F-15-5) to ANSI
Burn-In Period ..................................	Page	3	Z21.88-2002 (in Canada, CSA-2.33-2002),
Lighting Millivolt Appliances .............	Page	3	and CAN/CGA-2.17-M91 in both USA and
Gas Controls .....................................	Page	3	Canada, as vented gas heaters.
Control Compartment Access ...........	Page	4	Installation must conform to local codes. In
Operation & Care of Your Appliance..	Page	4
			the absence of local codes, installation must
Maintenance Procedures...................	Page	4
			comply with the current National Fuel Gas
Maintenance Schedule ......................	Page	6
			Code, ANSI Z223.1. (In Canada, the current
Front Glass Door Assembly,
			CAN-1 B149 installation code.)		Electrical
Removal and Installation.................	Page	7
			wiring must comply with the National Elec-
Burner Adjustments ..........................	Page	7	trical Code ANSI/ NFPA 70 - latest edition.
Flame Appearance and Sooting.........	Page	7	In Canada, the current CSA C22-1 Canadian
Log Placement Instructions ..............	Page	8	Electrical Code - latest edition.
Millivolt Appliance Checkout .............	Page	11
Blower Operation ..............................	Page	11		WARNING
Fireplace Requirements.....................	Page	11
Wiring Diagrams ...............................	Page 11			Do not attempt to alter or modify
Warranty Information........................	Page	12		the construction of the appliance
Accessory Components ....................	Page 12			or its components. Any modi-
Lighting Instructions – Millivolt ........	Page	15		fication or alteration may void
Replacement Parts List .....................	Page	17		the warranty, certification and
Troubleshooting Guide ......................	Page	19		listings of this unit.
INTRODUCTION
				WARNING
The Insert model covered in this manual is
				Improper installation,	adjust-
a B-Vent gas heater designed for residential
application for installation into an	existing			ment, alteration, service or
masonry or factory built solid-fuel	fireplace			maintenance can cause injury
using 4" diameter, UL1777 listed aluminum				or property damage. Refer to
liner for the exhaust. The vent must be routed
				this manual. For assistance or
through the existing fireplace flue system to the
				additional information consult
vent termination.
				a qualified installer,	service
This millavolt appliance is designed to operate				agency or the gas supplier.
on either natural or propane gas. A millivolt
gas control valve with piezo ignition system
provides safe, efficient operation. External
electrical power is required to operate the air
circulation blower.
2				NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

WARNING

These fireplace Inserts are vented heaters. Do not burn wood or other material in these appliances.

GENERAL INFORMATION

Installation, repair and annual service inspection should be performed by a qualified service technician.

It is imperative that the control compart- ment, burners and circulating air passage ways of the appliance be kept clean.

S'assurer que le brùleur et le compartiment des commandes sont propres. Voir les instructions d'installation et d'utilisation qui accompagnent l'appareil.

Provideadequateclearancesaroundairopenings and adequate accessibility clearance for service and proper operation.

Never obstruct the front openings of the appliance.

Due to high temperatures of this appliance adequate clearances need to be maintained from furniture and draperies and other combustibles. Locate furniture and window coverings accord-

ingly. The recommended clearance zone from the front of the appliance to combustibles is 36 inches (914 mm). Maintain all other clearances as outlined in the Installation Manual.

These fireplaces are designed as supplemental heaters. Therefore, it is advisable to have an alternate heat source when installed in a dwelling.

Input of millivolt model is variable. The rates are shown in the following table:

Millivolt Models with

MAnnually-Modulated Gas Valves

	Nat. Gas	Propane
Model No.	Input Rate	Input Rate
	(BTU/HR)	(BTU/HR)
EBVI25	17,000 to	19,500 to
	25,000	25,000
EBVI30	21,500 to	22,000 to
	30,000	28,000

Table 1