Selecting Active Satellite

After installing the active pair of satellites, use the Select Satellite

menu to choose which of the installed satellites will be active.

Setting the Skew Angle

The Set Skew Angle menu allows you to manually adjust the

skew angle of the antenna’s LNB.

Using the MCU Interface
54-0198 73
Proceed to "Setting the Skew Angle"
Select Satellite?
Enter Next Return
Select <SAT NAME A>
Yes Next Cancel
Select <SAT NAME B>
Yes Next cancel
Sat Name A
corresponds to the
first satellite selected
during the Install
Satellite process.
Sat Name B
corresponds to the
second satellite
selected during the
Install Satellite
process.
<SAT NAME A> selected <SAT NAME B> selected

Figure 3-18

Select Active Satellite

Proceed to "Updating Satellite
Frequency Data"
Set Skew Angle?
Enter Next Return
Skew: ##.#
- Enter +
Enter the desired skew angle.
Use the -/+ keys to set each
number. Selecting ENTER will
cycle the display through each
digit, then return to "Set Skew
Angle."

Figure 3-19

Set Skew Angle Menu

European systems only:

If DiSEqC is active on your IRD,

once the antenna restarts, the

antenna starts tracking the satellite

currently selected by the IRD,

overriding the Select Satellite

command.