Lennox Hearth LBLK-100 9A, Step 9B, Step 9C, Step 9D, Step 9E, Cabinet Bottom, Cabinet Bottom, Blower Assembly, Blower Mounting Tab, Blower Access Cutout, Blower Access Cutout

Step 9. - Installing The LBLK-100 Blower

9A. First, tilt the left side of the blower into the cutout (see Figure 4 ).

Left Side Of Blower Assembly Tilted Into Access CutoutBlower Access Cutout

Figure 4

Step 9B. Next, rest the blower on the cabinet bottom (see Figure 5 ).

Blower Access Cutout

LBLK-100 Blower Resting On Cabinet Bottom

Figure 5

Step 9C. Now gently slide the blower assembly towards the back of the fireplace (see Figure 6 ).

Step 9D. Rotate the blower assembly so the base rests on the cabinet bottom (see Figure 7 ).

Cabinet Bottom

Figure 6

Cabinet Bottom	Blower Assembly Base
Figure 7

Step 9E. Place the blower assembly in its final position at the back of the cabinet bottom, resting on the blower mounting tabs (see Figure 8 ). Bend the mounting tabs over the blower base to secure.

Blower Assembly

Blower Mounting Tab Blower Base

Figure 8

2 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.