Lennox Hearth LSE-36R Door, Track, Locking, Screw, Latch, Rod, Ember, Compartment, Bulb And Socket, Secure, At These, Three (3), Locations, From The, Inside, Screen Rod, Power Cord

UNIT INSTALLATION

1. Prepare the framed opening as illustrated in

Framing Specification on page 4. The header

location is important. Verify the minimum

distance before starting the installation.

2. Locate the main electrical connection on the

left side of the fireplace and connect it to the

outlet installed during the framing. Verify that

the power to the receptacle is off.

3. Lift and slide the unit into the opening until

the face is flush up against the wall. Secure the

unit to the side framing members with 1"

drywall screws. See Figure 8.

4. Install the dust cover assembly into the top

of the fireplace from the underside until the

unit snaps into position. Fold out the tabs

around the base to support it in position. This

must be done before the television is installed.

5. Hook the television assembly onto the screen

rod pins and let the unit hang in position. Plug

Ember

Compartment

Bulb And Socket

Figure 8

Secure

At These

Three (3)

Locations

From The

Inside

the television power cord into the top recep-

tacle routing behind the television latch (see

Figure 9 ).

6. The television assembly will rotate up into

the unit and lock onto the latch rod. See

Figure 10.

CAUTION: THE TELEVISION ASSEMBLY IS HEAVY. PLEASE CLEAR THE AREA IN FRONT OF THE FIREPLACE BEFORE ATTEMPTING TO SWING THE UNIT INTO POSITION. THE UNIT MUST SWING SLIGHTLY PAST HORIZONTAL TO LATCH. WE SUGGEST THAT TWO PEOPLE PERFORM THIS STEP.

7.Two locking screws have been provided to secure the television assembly after installa- tion. Locate the two slots in the assembly immediately in front of the latching rod. Hand tighten the screws completely into the inserts on both sides.

8.Refer to Figure 7 for the location of the door track and install at this time. Two door clips have been provided with these instructions.

Door

Track

Figure 7

6

Screen Rod

Power Cord

Detail Of

Top Receptacle

Tabs
Engagement Hooks	Top Receptacle
	Hand Holds
Figure 9

Locking

Screw

Latch

Rod

Figure 10

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.