ASSEMBLY OUTLINE

Before You Start

Check your inventory list to be sure you have all the necessary parts supplied in good usable condition. Check also for any concealed damage.

UNIT PRE-ASSEMBLY

Before the installation can begin, two components need to be assembled.

Dust Cover Assembly

The dust cover components come wrapped in foam. There are five (5) parts to the assembly, as shown in Figure 5.

Using the illustration for guidance, assemble the components. Use the tabs to lock the components together by bending each inward as illustrated. Bend out the base tabs as shown, to act as latches for installation later.

Set the assembly aside for installation later.

Television Assembly

Lay the television tray assembly onto a flat surface. Use a cardboard protector to protect the tray from marring.

Open the television box and remove all packing materials from the unit. Remove the television and place it beside the tray.

Note: The Television is provided with a remote control. The fireplace does not require this remote control. It may be discarded.

Untie the straps on the tray assembly and loosen them completely. Drape the straps out of the way as much as possible.

The television will lay face down on the tray as shown in Figure 6. The television is oriented centrally on the tray with the bottom against the base support. The straps are then doubled over the unit as shown in Figure 6 and drawn very taut. Lift the assembly up onto its base (as shown in Figure 9 ) and verify the security of the straps. Use the handles on each side of the unit to lift and hold the unit.

Note: The TV screen protrudes below the bottom frame of the tray assembly. Be sure to support the tray assembly above the work surface to protect the TV screen. Use the spacers from the TV box to do this.

CAUTION: THE SECURITY OF THE STRAPS IN THIS ASSEMBLY IS IMPORTANT SO THAT THE INSTALLATION STEPS THAT FOLLOW CAN BE PERFORMED SAFELY.

Television

(Face Down)

TelevisionTray

Straps Assembly

Side

Top

Front/Back

Locking

Tab Bent

Into Place

Side

Secure Television

Spacers

Straps Tightly

 

Base

Tabs

Figure 5

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Base Support

Figure 6

Television Handles Base

5