Parts Identification
Cabinet Parts | HEPA Cartridge Parts | |
Filter Section Access |
| |
Panel | HEPA Filter | |
Retaining Clips (4) | (STAGE2) | |
Carbon | ||
Inlet Collar | ||
(STAGE 1) | ||
Cabinet | HEPA Filter Mesh | |
| (Protects HEPA | |
Outlet Collar | Filter) | |
| ||
On/Off Switch | Inner Charcoal Filter | |
(STAGE 3) | ||
| ||
Motor Section |
| |
Access Panel |
| |
figure 1. | figure 2. | |
Inside Cabinet (Filter Section) | Optional Coconut Shell Carbon Canister |
Motor/Impeller
Filter Adapter (threaded)
‘O’ Ring
figure 3.
RECOMMENDED for greater capacity removal of chemicals and odors.
Located inside the HEPA filter cartrige to provide the third and final stage of filtration.
Replace inner charcoal filter when using the optional carbon canister.
figure 4.
Specifications
|
|
|
|
Nom. Air Flow @ 120VAC @ 0.0” E.S.P. | 180 cfm | 320 cfm | 500 cfm |
Weight (max - unpackaged) | 25 lbs. | 35 lbs. | 40 lbs. |
Supply Voltage | 120 VAC | 120 VAC | 120 VAC |
Nom. Measured Power Consumption | 125 Watts | 125 Watts | 225 Watts |
Motor Current Draw | 1.0 amps, 60hz | 1.0 amps, 60hz | 1.8 amps, 60hz |
Air Inlet Collar (max) | |||
Air Outlet Collar (max) | |||
Operating Temp. Range - Return air (ºF) | 30 to 95 | 30 to 95 | 30 to 95 |
HEPA filter efficiency = 99.97% @ 0.3 micron particles |
|
|
|
Ambient temperature range: |
|
|
|
