Burner Flame

Burner Flame - Start burner and allow to operate for a few minutes to establish normal burning conditions. Check burner flame by observation. Flame should be predomi2 nantly blue in color and strong in appearance.

CAUTION

Periodically look through the flame sight glass to check the burner flame.

Contact your Lennox dealer for a periodic unit inspection by a qualified service technician.

Service Reminders

Call your Lennox service technician if unit is inoperative. Before calling, always check the following to be sure ser2 vice is required.

1 - Check that electrical disconnect switches are ON.

2 - Check room thermostat for proper setting.

3 - Replace any blown fuses or reset circuit breakers. Investigate reason for blown fuses or tripped break2 ers.

4 - Make sure gas valve is in ON position.

5 - Air filter should not be plugged limiting air flow.

6 - Is gas turned on at meter?

7 - Is manual main shut2off valve open?

Safety Precautions

If you discover any of the following, shut down your unit, and contact an independent Lennox dealer for an inspection by a qualified technician.

DIf you repeatedly hear any new or unfamiliar sounds while your unit is operating, there may be a problem. For example, poorly performing burners can produce unfamiliar noises.

DIf you smell any unusual odors, your unit may be oper2 ating improperly. For example, units can give off unfa2 miliar odors if components are required to operate in abnormal conditions.

DLook for visible signs of a malfunctioning unit. Exam2 ples include unusual amounts of condensate on win2 dows inside your house, visibly burnt components or unusual dirt or rust accumulations on the vent pipe or in the unit.

DIf you experience headache, nausea, fatigue, or dizzi2

ness, the cause could be exposure to carbon monox2 ide gas. This is often misdiagnosed as the flu because symptoms are similar. If you suffer from flu-like symp2 toms that are exaggerated at home, but seem to sub2 side while you are away from the house, exposure to carbon monoxide could be the cause.

Your vigilance may pay off in early detection of a problem before either personal injury or property damage occurs. Do not hesitate to contact a qualified service technician as an investment in your well being.

Planned Service

You should expect a service technician to check the fol2 lowing items during an annual inspection. Power to the unit must be shut off for the service technician's safety.

Fresh air grilles and louvers (on the unit and in the room where the furnace is installed) - Must be open and unob2 structed to provide combustion air.

Burners- Must be inspected for rust, dirt, or signs of wa2 ter.

Vent pipe - Must be inspected for dirt, signs of water, damaged or sagging unsupported pipe, or disconnected joints.

Unit appearance - Must be inspected for rust, dirt, signs of water, burnt or damaged wires, or components. Blower access door - Must be properly in place and pro2 vide a seal between the return air and the room where the furnace is installed.

Return air duct - Must be properly attached and provide an airtight seal to the unit.

Operating performance - Unit must be observed during operation to monitor proper performance of the unit and the vent system.

Combustion gases - Flue products must be analyzed and compared to the unit specifications.

Problems detected during the inspection may make it necessary to temporarily shut down the furnace until the items can be repaired or replaced.

Pay attention to your furnace. Situations can arise be2 tween annual furnace inspections that may result in un2 safe operation. For instance, items innocently stored next to the furnace may obstruct the combustion air supply. This could cause incomplete combustion and the produc2 tion of carbon monoxide gas.

Page 6

Page 6
Image 6
Lennox International Inc G32V SERIES manual Service Reminders, Safety Precautions, Planned Service

G32V SERIES specifications

Lennox International Inc. is renowned for its cutting-edge HVAC solutions, and the G32V Series stands out as a prime example of their commitment to efficiency, innovation, and comfort. This series of gas furnaces is designed to meet the needs of homeowners looking for a powerful, reliable heating system without compromising on energy efficiency or environmental impact.

One of the main features of the G32V Series is its variable-speed technology. This advanced system allows for precise temperature control and quieter operation. The variable-speed blower motor adjusts the airflow based on the demand for heating, which means less energy consumption during milder weather. This feature not only enhances comfort but also significantly reduces energy bills compared to conventional systems.

Another notable characteristic of the G32V Series is its impressive Annual Fuel Utilization Efficiency (AFUE) rating of up to 96%. This level of efficiency means that a greater percentage of the energy consumed goes towards heating the home rather than being wasted through venting. As a result, homeowners can enjoy substantial savings on their utility costs while also contributing to reduced greenhouse gas emissions.

The G32V Series also incorporates a reliable and durable design, featuring a stainless steel heat exchanger that ensures excellent heat transfer and longevity. The multi-position design allows for flexible installation options, making it suitable for various home layouts. Moreover, the furnace is equipped with advanced safety features, including an integrated control board that continuously monitors the system’s operation for any abnormalities, ensuring reliable performance.

In addition, the G32V Series is compatible with a range of smart home technologies. This allows homeowners to integrate their heating system with home automation systems, enabling remote control and monitoring capabilities. The system can be integrated with Lennox’s iComfort Wi-Fi thermostat, offering homeowners the ability to adjust settings from anywhere, enhancing convenience and energy savings.

Overall, Lennox International Inc.'s G32V Series gas furnaces are designed with state-of-the-art technology and features that prioritize efficiency, comfort, and reliability. With variable-speed operation, high AFUE ratings, and compatibility with smart home technologies, these furnaces represent a significant investment in reliable home heating for the modern homeowner.