Applying labels to the base cover:
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover,you need to apply the following labels:
1 Product label
1a Non-mercury label
Note: If the computer you are servicing is an LED-backlight LCD model,
you need to paste this label so that the notice for mercury on the product
label is covered.
2 Homologation label
Following labels need to be peeled off from the old base cover,and need to be
put on the new base cover.
3 Wireless LAN LMAlabel
4 SIM ICCID label
5 Windows license label (COA)
6 Wireless WANLMA label
7 Japan recycle label (for LE model)
8 Israel label
9 SIRM label
10 China modem label
11 Wireless WANIMEI label or wireless WAN ESN label
For some models, you also need to apply one or two FCC labels. Check the old
base cover; if it has one or two FCC labels, find duplicates of them in the label
kit and apply them to the new base cover.
For the location of each label, refer the following figure:
321 4
5
6
11
10
8 7
9
1a
124 ThinkPad T400 and R400 HardwareMaintenance Manual